1. Decide what products you need based on the glass type you are using

3.Initial clean with Clean Green (for both Sandblasted and Clear Glass)

- your glass should be placed horizontaly on an even surface

- use a spray bottle to apply a weak dilution of Clean Green

- use a squeegee to remove the liquid

- use a cloth to dry the glass completely 

4. Apply Nanogate Cleaner CLE 301 (for clear glass only)

- use a clean rag to apply CLE 301 evenly over the entire panel

- continue to rub the panel until the glass appears clear again

5. Apply Nanogate Anti-Fingerprint Coating

- use E2C 105 for clear glass and E2C 113 for sandblasted glass

- use a clean syringe (no needle) to measure out the required volume 

- squirt the Nanogate more or less over the entire panel

- use a car polisher to spread the Nanogate evenly over the entire panel

- to ensure an even spread, move the polisher backwards and forwards from top to bottom over the entire panel and then backwards and forward from left to right over the entire panel 

6. Leave the glass in a horizontal position to dry

- the glass cannot be touched for an hour after aplication

- thereafter the glass is touch dry but requires 24 hours to cure completely